H-10 Record

H-10 Record

H-10 Record
H-10 COBOL Record Layout
H-10 Record Data Dictionary

 H-10 Record

 Position Length Data Item Data Type Notes

1 - 6 6 Operator Number Numeric 

7 - 9 3 Report Type Alphanumeric Must be 'H10'

10 - 11 2 District Numeric Must be one of
the following:
01,02,03,04,05,
06,08,09, 10, 
11,13,14

12 1 Record Type Alphanumeric Must be 'R'

13 - 21 9 UIC Control No. Numeric 

22 - 50 29 Filler Alphanumeric Must be spaces

51 - 52 2 Cycle Year Numeric 

53 - 54 2 Cycle Month Numeric 

55 - 58 4 Avg. Inj PSIG Numeric 

59 - 62 4 Max Inj PSIG Numeric 

63 - 70 8 Vol Inj BBLS Numeric 

71 - 78 8 Vol Inj MCF Numeric 

79 - 80 2 Annulus Count Alphanumeric 

81 - 84 4 Annulus Min PSIG Alphanumeric 

85 - 88 4 Annulus Max PSIG Alphanumeric 

89 - 98 10 Filler Alphanumeric Must be spaces

99 - 102 4 Due Date Numeric In Year (without
the century), 
Month order
103 - 104 2 Filler Alphanumeric 

105 - 109 5 Lease Number Numeric 

110 - 115 6 Gas ID Number Numeric 

116 - 121 6 Well Number Alphanumeric

122 - 129 8 Field Number Numeric 

130 - 161 32 Field Name Alphanumeric

162 - 193 32 Lease Name Alphanumeric

194 - 206 13 County Name Alphanumeric

207 1 Filler Alphanumeric

208 - 212 5 Depth Top Inj Numeric 
Interval

213 - 217 5 Depth Bottom Numeric 
Inj Interval

218 1 Injection Thru Alphanumeric 

219 - 223 5 Depth Packer Numeric 

224 1 SW Injected Alphanumeric 

225 1 FW Injected Alphanumeri

226 1 BW Injected Alphanumeric 

227 1 Air Injected Alphanumeric 

228 1 Gas Injected Alphanumeric 
229 1 Polymer Injected Alphanumeric 230 1 CO2 Injected Alphanumeric 231 1 Other Fluid Alphanumeric Injected 232 - 251 20 Fluid Comment Alphanumeric 252 1 Norm Injected Alphanumeric 253 1 Fluid From Alphanumeric Other Source 254 - 260 7 Filler Alphanumeric 261 - 268 8 API Number Numeric  269 - 400 132 Filler Alphanumeric H-10 COBOL Record Layout The position numbers on the right hand side give the beginning position for that data item. 01 H10-REPORT-RECORD. POSITION 03 H10-RECORD-ID. 05 H10-OPERATOR-NO PIC 9(6). 1 05 H10-REPORT-TYPE PIC X(3). 7 88 H10-REPORT VALUE 'H10'. 05 H10-DISTRICT PIC 9(2). 10 88 H10-VALID-DISTRICT VALUE 01,02,03, 04,05,06,07,08, 09,10,11,13,14. 05 H10-RECORD-TYPE PIC X(1). 12 88 H10-REPORT-REC VALUE 'R'. 05 H10-UIC-CONTROL-NO PIC 9(9). 13 05 FILLER PIC X(29). 22 05 H10-CYCLE-MONTH-DATA. 07 H10-CYCLE-YEAR PIC 9(2). 51 07 H10-CYCLE-MONTH PIC 9(2). 53 07 H10-AVG-INJ-PSIG PIC 9(4). 55 07 H10-MAX-INJ-PSIG PIC 9(4). 59 07 H10-VOL-INJ-BBLS PIC 9(8). 63 07 H10-VOL-INJ-MCF PIC 9(8). 71 07 H10-ANNULUS-DATA. 09 H10-ANNULUS-COUNT PIC 9(2). 79 09 H10-ANNULUS-MIN-PSIG PIC 9(4). 81 09 H10-ANNULUS-MAX-PSIG PIC 9(4). 85 07 H10-ANN-DATA-SPACE REDEFINES H10-ANNULUS-DATA. 09 H10-ANN-CNT-S PIC X(2). 09 H10-ANN-MIN-S PIC X(4). 09 H10-ANN-MAX-S PIC X(4). 05 FILLER PIC X(10). 89 05 H10-DUE-DATE. 07 H10-DUE-YEAR PIC 9(2). 99 07 H10-DUE-MONTH PIC 9(2). 101 03 FILLER PIC X(2). 103 03 H10-LEASE-NO PIC 9(5). 105 03 H10-GASID-NO PIC 9(6). 110 03 H10-WELL-NO PIC X(6). 116 03 H10-FIELD-NO PIC 9(8). 122 03 H10-FIELD-NAME PIC X(32). 130 03 H10-LEASE-NAME PIC X(32). 162 03 H10-COUNTY-NAME PIC X(13) 194 03 FILLER PIC X(1). 207 03 H10-DEPTH-TOP-INJ-INTERVAL PIC 9(5). 208 03 H10-DEPTH-BOT-INJ-INTERVAL PIC 9(5). 213 03 H10-INJ-THRU PIC X(1). 218 88 H10-THRU-TUBING VALUE 'T'. 88 H10-THRU-CASING VALUE 'C'. 03 H10-DEPTH-PACKER PIC 9(5). 219 03 H10-TYPE-INJ-FLUID. 05 H10-SW PIC X(1). 224 88 H10-SW-INJECTED VALUE 'Y'. 88 H10-SW-NOT-INJECTED VALUE 'N'. 05 H10-FW PIC X(1). 225 88 H10-FW-INJECTED VALUE 'Y'. 88 H10-FW-NOT-INJECTED VALUE 'N'. 05 H10-BW PIC X(1). 226 88 H10-BW-INJECTED VALUE 'Y'. 88 H10-BW-NOT-INJECTED VALUE 'N'. 05 H10-AIR PIC X(1). 227 88 H10-AIR-INJECTED VALUE 'Y'. 88 H10-AIR-NOT-INJECTED VALUE 'N'. 05 H10-GAS PIC X(1). 228 88 H10-GAS-INJECTED VALUE 'Y'. 88 H10-GAS-NOT-INJECTED VALUE 'N'. 05 H10-POLYMER PIC X(1). 229 88 H10-POLYMER-INJECTED VALUE 'Y'. 88 H10-POLYMER-NOT-INJECTED VALUE 'N'. 05 H10-CO2 PIC X(1). 230 88 H10-CO2-INJECTED VALUE 'Y'. 88 H10-CO2-NOT-INJECTED VALUE 'N'. 05 H10-OTHER-FLUID PIC X(1). 231 88 H10-OTHER-INJECTED VALUE 'Y'. 88 H10-OTHER-NOT-INJECTED VALUE 'N'. 05 H10-FLUID-COMMENT PIC X(20). 232 05 H10-NORM PIC X(1). 252 88 H10-NORM-INJECTED VALUE 'Y'. 88 H10-NORM-NOT-INJECTED VALUE 'N'. 05 H10-FLUID-OTHER-SOURCE PIC X(1). 253 88 H10-FLUID-FROM-OTHER VALUE 'Y'. 88 H10-FLUID-NOT-FROM-OTHER VALUE 'N'. 03 FILLER PIC X(7). 254 03 H10-API-NUMBER. 05 H10-API-COUNTY PIC 9(3). 261 05 H10-API-SUFFIX PIC 9(5). 264 03 FILLER PIC X(132). 269 H-10 Record Data Dictionary H10-OPERATOR-NO The operator number assigned to the company by the RRC. Taken from the Organization Report (Form P-5). H10-REPORT-TYPE Must be 'H10' for H-10 reports. H10-DISTRICT The RRC district in which the well is located. See DR-DISTRICT for further details. H10-RECORD-TYPE Must be 'R' for report records.
H10-UIC-CONTROL-NO Must be the unique number assigned to the well by RRC Environmental Services. H10-CYCLE-YEAR Must be a valid two-digit numeric cycle year. H10-CYCLE-MONTH Must be a valid two-digit numeric cycle month. H10-AVG-INJ-PSIG The average injection pressure reported for the H10-CYCLE-MONTH. Must be less than or equal to the H10-MAX-INJ-PSIG. Must contain zeros if there is nothing to report. H10-MAX-INJ-PSIG The maximum injection pressure reported for the H10-CYCLE-MONTH. Must be greater than or equal to the H10-AVG-INJ-PSIG. Must contain zeros if there is nothing to report. H10-VOL-INJ-BBLS The total volume of liquid (barrels) that was injected for the reported H10-CYCLE-MONTH. Must contain zeros if there is nothing to report. H10-VOL-INJ-MCF The total volume of gas (MCF) that was injected during the reported H10-CYCLE-MONTH. Must contain zeros if there is nothing to report. H10-ANNULUS-COUNT This is a count of the annulus readings taken during the reported H10-CYCLE-MONTH. H10-ANN-CNT-S must contain spaces if there is nothing to report. H10-ANNULUS-MIN-PSIG This is the minimum annulus pressure (PSIG) reported during the H10-CYCLE-MONTH. Must be less than or equal to the reported H10- ANNULUS-MAX-PSIG. H10-ANN-MAX-S must contain spaces if there is nothing to report. H10-ANNULUS-MAX-PSIG This is the maximum annulus pressure (PSIG) reported during the H10-CYCLE-MONTH. Must be greater than or equal to the reported H10-ANNULUS-MIN-PSIG. H10-ANN-MIN-S must contain spaces if there is nothing to report. H10-FRESH-WTR-INJ-BBLS This is the amount of fresh water injected in barrels. H10-DUE-DATE This is the date the report is due in year, month format. H10-LEASE-NO Must be a valid five-digit, RRC-assigned oil lease number. If this report pertains to a gas well, this field must contain zeros. H10-GASID-NO Must be a valid six-digit, RRC-assigned gas identification number. If this report pertains to an oil lease, this field must contain zeros. H10-WELL-NO Must be a valid six-character alphanumeric well number. H10-FIELD-NO The eight-digit number assigned to the field by the RRC. H10-FIELD-NAME The field name exactly as shown on the RRC proration schedule. H10-LEASE-NAME The lease name exactly as shown on the RRC proration schedule. H10-COUNTY-NAME Must be a valid 13 character alphanumeric county name. The H10- API-COUNTY code must match this county name. H10-DEPTH-TOP-INJ-INTERVAL This is the depth of the well to the top of the injection or disposal zone. Must be numeric. H10-DEPTH-BOT-INJ-INTERVAL This is the depth of the well to the bottom of the injection or disposal zone. Must be numeric. H10-INJ-THRU This is to determine if injection is through tubing or casing. Value as 'T' for tubing or 'C' for casing. H10-DEPTH-PACKER This is the depth of the tubing packer. Must be numeric. H10-SW Indicates if salt water is injected into the well. Value as 'N' for not injecting salt water or 'Y' for injecting salt water. H10-FW Indicates if fresh water is injected into the well. Value as 'N' for not injecting fresh water or 'Y' for injecting fresh water. H10-BW Indicates if brackish water is injected into the well. Value as 'N' for not injecting brackish water or 'Y' for injecting brackish water. H10-AIR Indicates if air is injected into the well. Value as 'N' for not injecting air or 'Y' for injecting air. H10-GAS Indicates if natural gas is injected into the well. Value as 'N' for not injecting natural gas or 'Y' for injecting natural gas. H10-POLYMER Indicates if polymer is injected into the well. Value as 'N' for not injecting polymer or 'Y' for injecting polymer. H10-CO2 Indicates if carbon dioxide is injected into the well. Value as 'N' for not injecting carbon dioxide or 'Y' for injecting carbon dioxide. H10-OTHER-FLUID If the type of fluid injected is other than the types listed, this field must be valued as 'Y' and H10-FLUID-COMMENT (below) must contain a comment. A value of 'N' indicates that other fluids were not injected and H10-FLUID-COMMENT (below) must contain spaces. H10-FLUID-COMMENT Must contain a comment if the H10-OTHER-FLUID is valued as 'Y'. Otherwise, this field must contain spaces. H10-NORM Indicates if norm is injected into the well. Value as 'N' for not injecting norm or 'Y' for injecting norm. H10-FLUID-OTHER-SOURCE Indicates if injected fluids are produced from other sources other than your own. Value as 'N' for fluids are not from other sources or 'Y' for fluids are from other sources. H10-API-NUMBER The unique eight-digit American Petroleum Industry (API) number identifying the well bore for the well. The first three digits are the county code and the next five digits are the unique number. The state code of 42 is assumed.

Last Updated: 7/21/2015 5:23:11 AM