Environmental Permit Types and Information

The Oil and Gas Division regulates oil and gas waste transportation, storage and disposal activities.  Learn more about the various permitting programs and requirements.

Permit Types

Waste Haulers

Hydrostatic Test Discharges,
Minor and Other Permits

Pits

Recycling

Discharges

Landfarming, Landtreatment
& Land Application

Reclamation Plants

Waste Separation Facilities

Commercial Facilities

Hazardous Wastes

NORM Waste

Renewal, Transfer

& Amendment 

Do I need an Environmental Permit?

Any person who transports, handles, stores, discharges, disposes or recycles oil and gas waste subject to the Commission’s jurisdiction must have authority from the Commission. At a minimum, you must be an Operator with an active P-5 (Organizational Report) with the Commission. Waste management authorized by the Commission without a permit can be found in the Summary of Statewide Rule 8.

If you are transporting, handling, storing, discharging, disposing, reclaiming or recycling oil and gas off lease or on a lease other than the lease where the oil and gas waste was generated, you must have a permit from the Commission. The permit may be a minor permit issued by the appropriate District Office, or a permit from Technical Permitting in Austin. For more information continue to explore our website or click on Contacts for information on how to contact Environmental Permits staff.

Before You Get an Environmental Permit

Prior to application for any permit, the applicant must file a Form P-5, Organization Report with the Commission. There will be a fee associated with the filing of the Form P-5. The applicant can contact the P-5 Department at 512-463-6772 for any questions regarding the Form P-5.

Applying For an Environmental Permit

Environmental Permitting & Support does not accept incomplete applications. Applicants are required to submit a complete application package for staff review. If an application is knowingly submitted as incomplete it will not be reviewed and may be subject to return.

According to Statewide Rule §1.201(4), an applicant may make no more than two supplemental filings to complete an application. If the application is still incomplete, Technical Permitting shall administratively deny the application and no additional submissions will be accepted or reviewed.

Once an application package has been submitted only minor modifications or staff recommended amendments will be accepted during the review process. If the original application is fundamentally revised the application must be withdrawn and a new application may be filed.


Nearly all surface disposal methods will have some associated equipment and storage. Construction and engineering information will be required for these facilities, including but not limited to:
  • Facility Diagram
  • Storage and Pit Information
  • Processing and Equipment Information

Applications for a permit for a surface disposal method in one location for a period longer than one year must provide site specific information, including but not limited to:

  • Geographic and Location Information
  • Environmental Information
  • Real Property Information

Many applications will require a description of the disposal method. In the case of technologies used to recycle, reclaim, treat or separate oil and gas wastes, a detailed description of that process will be necessary. Illustrations, like flow diagrams, of the treatment are helpful for demonstrating each step of the method.


Professional Engineers and Geoscientists

Engineering and geologic work products must be prepared under seal of a registered professional engineer (P.E.) or geologist (P.G.), respectively, as required by the Occupations Code Chapters 1001 and1002.

 

Last Updated: 7/24/2019 11:31:45 AM